Milking Parlor - Heritage

Double 20 Germania ProTime I -still installed, but no longer milking

PT-I with Afi, top Outlet Claws and thru-the-wall ports down to the basement

Air-Powered CIP cup holders in closed position

Air-Powered CIP cup holders in open position

Afi Milk Meter and Controller;
Universal Pulsator

Germania TopOutlet Claw with DeLaval 06 shells - ID antenna at lower right.

Heritage CIP / Receiver All-in-One Group

(2) 15 hp SutorBuilt Lobe-style Vac Pump with Frequency Controller-Variable Speed Drive

Cattle Waterers in the exit alleys installed behind stainless fences.

Basement with Dbl. Loop, dbl. Slope 3" lines and CIP-Receiver Group. Note - we strongly recommend against basements.

Cow Platforms are 49" wide. Will be widened to 53" to accommodate today's larger cows - 1,800 and 2,000 lbs

Parlor to be modularized and pre-assembled. Delivered in the form of (4) 10 - stall Modules and installed on your site in just a few days.

Parlor # 105 - GPT1

Double 20 - Original Germania

All-Stainless HerringBone Parlor

With Complete Advanced AfiMilk System

$398,500 - $9,960 per Stall (NS)

Equipment Details - IF You Buy the Parlor Thru TechForAg

All-Stainless Germania ProTime I Stalls

Germania Model SB All-Stainless Arm TakeOffs

Afi 'Advanced' Milk Meters, Cow ID, Automatic Heat Detection

Computerized Dairy Management System

No ID Tags, available from TechFor Ag or DeLaval / Germania

Heritage CIP - Receiver Combination Group with Variable Speed Drive - Built from some New and some remanufactured components already at the dairy.

Note - This Group not included if you buy the parlor directly from NorSwiss, additional cost of about 38,000

7.Original Germania galvanized Grates. Plus stainless Gutter and Curbing - New!

Stainless Gutter and Curbing not included if you buy the parlor from the Dairy. You can buy them from TechForAg at about $12,000 or pour a concrete gutter

Top-Outlet Claws with DeLaval 06 shells

Universal Pulsation System

10. Dbl. loop, dbl slope 3” Lo-lines

11. (2) 15 hp SutorBuilt Vacuum Pumps, with Variable Speed Drive

12. 10 hp Atlas-Copco Screw Compressor

13. Twin-Tower Drier - New! Not included if you buy the parlor from the dairy, additional cost of about $4,500

14. 10,000 lbs/hr Plate Cooler - New! Not included if you buy the parlor from the dairy, additional cost of about $12,000

15. Original Germania Crowd Gate - 30 ft wide

16. Comprehensive Spare Parts Inventory - New! Not included if you buy from the dairy - additional cost of about $6,000

17.

Dual Filter Array including multiple butterfly valves - New! Not included by the dairy - additional cost of about $3,000

18 . Accessories:

- Stainless Breezeway Fences

- 500 gl + 750 gl Reserve Tanks for pre- and post dip Iodine

- Pit Mats

- Cattle waterers along entire cow platform

History

Parlor installed in 1999 - milked from 800 to 1500 cows 3x until late 2008.

Dairy continued to grow. Changed over to a DeLaval/Germania/AfiMilk Rotary in late 2008. Dbl. 20 initially intended to become hospital barn, but no longer needed.

Same parlor bought new today would cost about $725,000, delivered and installed.

You Can Acquire this Parlor -

...two ways:

'As-Is’ directly from the owner Andy Heer 715-651-1493, negotiate the best price you can, then remove and re-install it yourself - $250,000.

Remanufactured by TechForAg - $398,500, includes all items shown as New above. By the time you get it, parlor looks like new and works like new, covered by an 18-months Warranty. Includes comprehensive Spare Parts Inventory, enough for 2 to 3 years.

Delivery

Removal of parlor will take one week. Remanufacturing about 6 weeks. Installing it at your place and reconnecting all lines, plus installing the vacuum system, compressed air system, crowd gate and CIP Receiver Group - about three weeks. Delivery also depends on other projects ahead of yours in the production schedule.

What Size Building?

Width - 40 ft which allows enough space for the cattle waterers on each side and people walkways; Length - 92 ft plus the width of the BreezeWay; Height - 10ft

(Dimension figured generously)

Modularized Parlor

Parlor will be Modularized, delivered and installed on your prepared cow platforms in about 7 working days.

Cost of delivery to a location anywhere East of the Mississippi and West of a line from Toronto to Jacksonville, FL included.

We can also deliver this parlor everywhere else for somewhat higher freight and on-site installation charges.

Other Services

Includes Parlor Planning Book - anything you need to know about planning and building a Milking Parlor

Parlor Layout Service - send us a rough sketch of what you would like to do and we'll convert it into a layout. Or request our Standard Parlor Template, mark it up, return it to us and we'll convert it into your very own custom layout

Self Service DVD on Automatic TakeOffs.

Warranty - All materials covered for 18 months. Labor for 180 days (In Wisconsin only) Does not cover rubber parts and other consumables.

Click any photo for larger photo gallery and descriptions.

Contact Tech for Ag for more information on this and other available milking parlors

Optionally Available