Usually takes us 4 to 6 weeks to build a parlor of this design. Delivery also depends on other parlors in the production schedule ahead of yours.

 What Size Building?

Width - 32 ft for Rapid Exit;                Length - 45 ft                          Height - 10ft
(Dimension figured generously)

Modularized Parlor

Parlor will be Modularized, delivered and installed on your prepared cow platforms in about 10 to 12 working days.
Cost of freight and on-site installation included - in Wisconsin. Can be installed anywhere else for slightly higher installation charges.

Other Services

Includes Parlor Planning Book - anything you need to know about planning and building a Milking Parlor

Parlor Layout Service - send us a rough sketch of what you would like to do and we'll convert it into a layout. Or request our Standard Parlor Template, mark it up, return it to us and we'll convert it into your very own custom layout.

Self Service Training DVD on Automatic TakeOffs

Start-Up of Milker Training and on-site assistance

24/7 Phone Support after Start-Up

Warranty All materials covered for 18 months. Labor for 180 days (In Wisconsin only) Does not cover rubber parts and other consumables
1.All-Stainless ParaBone Stalls, Rapid Exit, Automated Cow Traffic

2.Stainless Gutter - Stainless Curbing - Stainless Grates

3.HERITAGE Model C All-Stainless No-Arm TakeOffs

4.Top-Outlet Claw Clusters with DeLaval Delatron Pulsators

5.HERITAGE CIP/ Receiver Combination Group with Variable Speed Drive, for details click here

6.All-Stainless HERITAGE Crowd Gate, for details click here

7.3” Lo-lines, 2” CIP Lines, 2” Discharge Line

8. 15 hp SutorBuilt Vacuum Pump, with Variable Speed Drives

9 (2)  7.5 hp Compressor with Twin-Tower Drier

10.      Accessories:
- (3)” Wash-Up hoses

- All-Silicon Rubber, except inflations

- (2) Extra Overhead Channel (For front & back of pit and into Machine Room)

- Stainless Pit Steps
- Extensive Spare Parts Inventory

- Stand-by Milk Pump

- Stand-by VSD for Milk Pump

- Stand-By Pulsation Controller

- (1) Extra Claw Cluster

- Stainless Breezeway Fences

- Wash Sinks, Filter Cabinet, etc.

- Rubber Mats on the cow platforms

Equipment Details
Site Map for TechForAg dairy parlors
Copyright 2007 Technology For Agriculture LLC * All Rights Reserved
Site Design and SEO by S&J Enterprises 
HomeAbout TFAParlor PlanningProductsParlors for SaleGermania PartsRecent ProjectsTech SupportContact

Technology For Agriculture LLC 
1855-A West Davenport St., Rhinelander, WI 54501 | Rolf's Mobil 715-360-3660 * Fax 715-362-7595 |  
Parlor # 179 - HPB
 Double 12 - All-Stainless ParaBone Milking Parlor

$291,000 ($12,100/Stall)

Includes delivery and installation anywhere in Wisconsin
Delivery & Installation anywhere else at slightly higher charges
HERITAGE Double 10 HerringBone All-Stainless Milking parlor
Brisket Bar in Indexed position
Brisket Bar in Rapid Exit Position
Stainless Gutter, Curbing and Grates are one welded unit. Grates made from 3/4' x 3/4" bars
New Style CIP Cup Holder – no more rubber cups to replace
Milking with Arm TakeOffs: No squawking, good balance, no residual vacuum on retract
Top Outlet Claw removes milk from fast milking cows better than any other claw.
CIP Receiver Combination Group – 40% less water, less energy, fewer chemicals and less time, literally!
All-Stainless Crowd Gate with Automatic Manure Scraper
(2) All-stainless Cylinders lift the gate for the return trip over head of the cows.
15 hp SutorBuilt Lobe-style Vacuum Pump.
10 hp Atlas-Copco Screw-type Compressor with two storage tanks and Twin Tower Drier
All-stainless Pit Steps with Hand Rail
Breezeway fences
Dbl. 20 comes with three Delatron Pulsation Controllers, one for the left and one for right side. Third Controller stands by for either side
Extra Overhead Channel at front and rear of pit. In ProTime I Parlors all overhead lines are hidden
Parlor Module
Tech for Ag
Click any photo to enlarge and descriptions.
Contact Tech for Ag for more information on this and other available milking parlors.

email me
For complete details - 30 pages worth - Click here. Every equipment group priced out separately. Includes pictures.
Very large file - takes about a minute to download. 
HomeAbout TFAParlor PlanningProductsParlors for SaleGermania PartsRecent ProjectsTech SupportContact